Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- guicomponents:plotsheets [2018/04/18 14:53] – [Timeseries Data configuration] oliver
+++ guicomponents:plotsheets [2020/03/26 15:25] (aktuell) – [Timeseries Data configuration] oliver
@@ Zeile 125: / Zeile 125: @@
 ^ diagramDescriptionRight | | | No  |
 ^ plane | | s = sagital, f=frontal, t=transversal, typically a shortcut for the plane. | No | The letter is printed in the diagram title after the character ":". |
-^ diagramType | XT | XT, XY | No |
+^ diagramType | xt | xt, xy, xyz, phase, phaseangle, phaseshift, fft | No |
 ^ diagramTitle | | Text line printed above the diagram followed by " :" and the side given with the attribute "plane". | No |
 ^ upperYLimit, upperXLimit | autoadjust | Only if both attributes are set to double values, the upper and lower limit of the diagram is set. | No | |
@@ Zeile 151: / Zeile 151: @@
 ^ xlabel, xlabel, zlabel | not set | For multidimensional plots as alternative to the label or name attribute, if the timeseries are saved as one-dimensional trajectories. | No |
 ^ xmean, ymean | false | Used for xy-plots only: If set to "true" the corresponding timeserie (defined by xlabel and xcomponent or yLabel and yComponent) is averaged and only the mean (const) value is used. If both attributes are set to "true" than a point is shown, else a horizontal/vertical line. | No |
-^ xstartvalue | false | Used in combination with xoffset. If set to true, than the value defined by xoffset is added to all frames. If the offset defined by xoffset is multidimensional, than the the attribute xoffsetComponent is used to extract the component. | No |
+^ xstartvalue, ystartvalue | false | If set to "true", than the value of the timeserie at index=0 is subtracted from all frames. This can be used in combination with xoffset.| No |
-^ xoffset |  | Used in combination with xstartvalue.  | No |
+^ xoffset, yoffset | 0 | Name of a variable. Its value is added. If the variable is a timeserie the value at index=0 is used. | No |
-^ xoffsetcomponent |  | Used in combination with xstartvalue.  | No |
+^ xoffsetcomponent, yoffsetcomponent | 0 | If the variable defined by the attribute offset is multideminsional than this attribute defines the component to use. | No |
-^ xsign | false | If set to true, than the sign of the timeserie is reversed. | No |
+^ xsign, ysign | false | If set to true, than the sign of the timeserie is reversed. This processing step is done before offset/startvalue processing!!! | No |
 If the attributes xLabel, yLabel, zLabel are used, the attribute "component" is ignored. Instead the attributes xComponent, yComponent and zComponent are used.